B2B BPM-1 Bedienungsanleitung Seite 11

LED indicator
The 6 LEDs on the left side of the display indicate the classification of
the measurements. The indicator is colour-coded. For details on the
classification, see the chapter "Evaluating measurements".
Colour Meaning
Green Optimal
Green Normal
Green Elevated normal
Yellow Slight hypertension
Orange Moderate hypertension
Red Severe hypertension
Device modes
The blood pressure monitor has five different modes, which are
explained below.
In all modes, the display light turns off after 30 seconds of user
inactivity.
After 1 minute of user inactivity, the measurement computer will
switch to sleep mode.
20
Sleep mode
After all settings have been made and the device is activated, the
blood pressure monitor automatically switches to sleep mode. The
display light and LEDs are deactivated in this mode.
You can also manually transfer data to the app on your smartphone or
tablet from sleep mode (see chapter "Manual data transfer").
From sleep mode, you can switch to the other modes as follows:
Mode Switching modes
Setting mode for Push the SET button to access the setting mode
date and time for date and time and to activate or deactivate
Bluetooth®.
Measurement Tap the user 1 touch button once to access the
mode measurement mode for user 1.
Tap the user 2 touch button to access the
measurement mode for user 2.
Transmission Hold the SET button for approx. three seconds to
mode access the transmission mode for manual data
transmission.
Memory mode Press and hold the user 1 touch button for approx.
three seconds to access the save mode for user 1.
Press and hold the user 2 touch button for approx.
three seconds to access the memory mode for
user 2.
21