Inserting Batteries - B2B BPM-1 Bedienungsanleitung

Setting mode
In setting mode, you can set the time format, date, time and automatic
data transmission after a measurement (see chapter "Setting the
measurement computer").
Measurement mode
In measurement mode, you can measure blood pressure and
automatically transfer the data to the app on your smartphone or
tablet (see chapter "Performing a measurement").
Transmission mode
In transmission mode, data from the blood pressure monitor is
transferred to the app on your smartphone or tablet. With automatic
data transmission, the blood pressure monitor will directly switch to
transmission mode once the measurement has been performed (see
chapter "Performing a measurement").
For manual data transmission, you must switch the blood pressure
monitor to transmission mode yourself (see chapter "Manual data
transfer").
Memory mode
In memory mode, you can have the measurements shown on the
display of the measurement computer (see chapter "Viewing the
measurements on the measurement computer") and erase the
measurements for a user (see chapter "Erasing measurements").
22
Start-up

Inserting batteries

NOTICE!
Risk of damage!
Improper use can lead to damage of the blood pressure
monitor.
• Do not use your blood pressure monitor with
rechargeable batteries.
The blood pressure monitor works with four type LR03/R03/AAA 1.5 V
batteries.
1. Open the battery compartment on the bottom of the device.
2. Insert four batteries in the battery compartment. In the process,
observe the marking for the correct polarity.
3. Close the battery compartment. All indicator segments will briefly
appear on the display
switch on and the "24 h" time format will blink on the display.
The measurement computer is now ready for the basic settings.
(see fig. A and B). Then the display will
23