Installation On A Wall - Respekta CH 1259 IXC Bedienungsanleitung

A Safety hole
2. Hang the appliance on the screw heads. Insert the screw heads into the round
slots; then move the appliance so that the screw heads are in the narrow section
of the suspension. Tighten the 4 screws to ensure safe and proper positioning.
3. Fix screws through the small safety holes to protect the appliance from
unintended moving.

2.4 Installation on a wall

1. If the cupboard is not suitable for installation, you can carry out a wall
installation. Screw 2 supplied screws into the wall relevant to the position of the
2 slots for the screw heads on the back of the appliance. Do not tighten the
screws completely as you have to hang the appliance on the screw heads.
A Safety hole
2. Hang the appliance on the screw heads. Insert the screw heads into the round
slots; then move the appliance so that the screw heads are in the narrow section
of the suspension. Tighten the 2 screws to ensure safe and proper positioning.
3. Fix screws through the small safety holes to protect the appliance from
unintended moving.
25