Chronograph Mode - Conrad 860112 Bedienungsanleitung

8� Press the "Start/Stop" (C) to increase or "Split/Reset" (D) to
decrease�
9� Press the "Mode" (B) button to confirm and set the date. The date
blinks�
10� Press the "Start/Stop" (C) to increase or "Split/Reset" (D) to
decrease�
11� Press the "Mode" (B) button to confirm and set year and day of the
week� The year blinks�
12� Press the "Start/Stop" (C) button to increase or the "Split/Reset" (D)
button to decrease� The day is automatically when resetting the year�
13� Press the "Mode" (B) button to confirm and set the hour format.
14� Press the "Start/Stop" (C) button or "Split/Reset" (D) button to
change�
15� Press the "Select" (A) button at any time to exit the setting
procedure�
6.3

Chronograph mode

Three different time records can be taken�
Period: The time between Starting and stopping the stopwatch by pressing
the "Start/Stop" (C) button� Record is reset to "0" each time (pressing
"Start/Stop" (C) or "Split/Reset" (D) buttons�
Split time: The time between a first starting point (by pressing the "Start/
Stop" (C) button) and a stop point by pressing "Split/Reset" (D)�
Cumulative time: The cumulative total of all times taken up to 300
records�
1� Press the "Start/Stop" (C) button to start or stop the stop watch� The lap
number is shown in the left upper corner of the LCD�
2� Repeatedly press the "Start/Stop" (C) button for taking further times�
Split and cumulative times are kept but the single record (on top) is
reset to "0" each time when starting a new time record� Up to 300 time
records can be stored�
3� Press the "Split/Reset" (D) button in order to take the split time, press
it again to resume�
4� Press the "Start/Stop" (C) button to stop all active processes�
5� Press "Split/Reset" (D) button and hold it for 2 seconds in order to
delete all records�
23