Calibration; Cleaning; Resetting The Bs2012 Video - sks BS2012 Bedienungsanleitung

SKS-Kinkel Elektronik GmbH
BS2012 Video hands-free
2.6.6

Calibration

Use this menu item to set whether or not the Indoor station has an external power supply. If you are not sure
whether the door station does have an external power supply, please contact the SKS support team.
Use the navigation keys to select the desired setting and confirm the selection with the confirmation key and follow
the instructions on the screen. Press the back key to go back in the menu.

Cleaning

2.7
The Indoor station offers a cleaning mode. In this mode, the touchscreen is deactivated for 25 seconds. This allows
for cleaning the CASA indoor station without accidentally activating the on-screen functions.
Use the navigation keys to select the desired setting and confirm the selection with the confirmation key.
3

Resetting the BS2012 Video

To reset the indoor station to the factory setting it is necessary to follow the steps below:
Step Description
1 Pull off the a+/b- terminal on the back of the indoor station.
2 Press the programming button (Prog.) on the back of the indoor station and keep it pressed
3 Plug in the a+/b- terminal again.
4 After a few seconds a confirmation beep sounds, it signals that the operation was successful.
Once the indoor station has been reset to factory setting, all settings are deleted and have to be made again.
Support-Hotline: +49 (0) 2661 98088 112
E-Mail: support@sks-kinkel.de
- 32 -
EN
Version: 1.2
Document art. no. 97010802