QUAMAR Q50-M80-Q13-T48 Anweisungen Seite 31

SECURITY SYSTEM TO AVOID THE ACCESS
TO THE MOVING PARTS
(VALID FOR ALL THE MODELS AND VERSIONS)
There are many protection systems (already described) to
avoid the access to the rotary parts as the safe screw on
the beans container and the metal ring, the fixed cone of
protection inside of the beans container and the protection
in metal placed in front of the milled coffee exit. All these
devices are conceived in order to protect who use the ap-
paratus. For this reason, we underline that you don't have
absolutely remove or modify them and, for any problem of
malfunctioning, you have to contact technical staff which
will know how to help you.
MAINTENANCE AND CLEANING
OF ALL THE APPLIANCES
Any maintenance or clearing must be performed only after
the machine is unplugged and has cooled down. To avoid
dragging or scratch on the body, never use cloth, sponge or
detersive with abrasive action. To clean the appliance use
a well-wrung damp cloth and specific products for stainless
steel, aluminium, paint, chrome. Do not use direct water
stream on the appliance.
Components that come into contact with food can be
cleaned separately by hand with water and washing-up
liquid.
Do not put them in the dish washer.
The empty container may be washed separately with water
and suitable detergent.
Before removing the container, remember to close the shut-
ter and switch on the coffee grinder; this will remove any
beans left in the grinding area.
From time to time check the inside of the doser to make
sure there are no deposits and if you have to remove any,
REMEMBER TO DISCONNECT THE MACHINE FROM
THE MAINS. On ECONOMY models, remember to switch
off the grinder after you have ground a certain amount of
coffee, to prevent the ground coffee from overflowing from
the cover of the doser.
T here
This product complies with EU Directive 2002/06/EC
The crossed bin symbol on the appliance indicates that the
product, at the end of its life span, must be disposed of
separately from domestic waste, either by taking it to a
separate waste disposal site for electric and electronic
appliances or by returning it to your dealer when you buy
another similar appliance. The user is responsible for taking
the appliance to a special waste disposal site at the end of its
life span; failure to do so will incur penalties under the waste
disposal regulations in force. If the disused appliance is
collected correctly as separate waste, it can be recycled,
treated and disposed of ecologically; this avoids a negative
impact on both the environment and the health and contributes
towards the recycling of the product's materials. For further
information regarding the waste disposal services available,
contact your local waste disposal agency or the shop where
you bought the appliance. The manufactures and importers do
not take the responsibility for recycling, treatment and
ecological disposal, either directly or through a public system.
EU 2002/96/EC
31
GB