Disposal; Troubleshooting - Beurer EM 29 Gebrauchsanweisung

• Before repositioning the universal cuff, first clean the body
parts to be treated.
Storage
• Switch off the control unit and disconnect the connec-
tion cable.
• Remove the universal cuff.
• Disconnect the connection cable from the universal cuff.
• Put the control unit, the universal cuff and the connection
cable in their original packaging.
• Store the original packaging in a cool, dry place that is
inaccessible to children.
• Remove the batteries from the device if you will not be
using it for a prolonged period of time. Leaking batteries
may damage the device.

8. Disposal

For environmental reasons, do not dispose of the
device in the household waste at the end of its ser-
vice life.
Dispose of the device at a suitable local collection or re-
cycling point. Dispose of the device in accordance with
the Waste Electrical and Electronic Equipment EC Direc-
tive – WEEE.
If you have any questions, please contact the local author-
ities responsible for waste disposal.
Empty, completely flat batteries must be disposed of using
specially designated collection boxes, recycling points or
electronics retailers. You are legally required to dispose of
the batteries.
The codes below are printed on batteries containing harm-
ful substances:
Pb = Battery contains lead
Cd = Battery contains cadmium
Hg = Battery contains mercury

9. Troubleshooting

Problem Possible cause
The batteries are
empty.
The device
does not
The batteries are
switch on.
not inserted cor-
rectly.
Universal cuff is
not in sufficient
contact with the
Stimulation is
skin.
too weak.
Water contact
electrodes are not
sufficiently moist.
27
Solution
Replace the bat-
teries.
Reinsert the bat-
teries.
Replace the
universal cuff.
Ensure there is
sufficient contact
with the skin.
Switch off the de-
vice. Moisten elec-
trodes.