Initial Use; Inserting The Batteries - Beurer EM 29 Gebrauchsanweisung

No. Designation
1 On/Off/Pause button
2 Intensity setting
▲ Increase
▼ Lower
3 Program/lock button
4 Battery compartment
5 Connector socket
6 Screen with LCD display
7 Battery status, appears when batteries are dead
8 Intensity, level 0 – 20
9 Pause symbol, flashes when activated
10 TIMER: Remaining time in the active program in
minutes
11 Button lock active
12 Active program

5. Initial use

Inserting the batteries

Open the battery compartment [4]
by pushing the cover in the area
marked with an arrow and sliding
downwards.
Insert the three alkaline AAA 1.5 V
batteries. When inserting the batte-
ries, ensure that the correct polarity
is observed.
Then close the battery compartment
lid until you hear and feel it click into
place.
Connecting the connection
cable and positioning the uni-
versal cuff
1. Connect the connection cable
with the metallic connection clips
on the universal cuff.
Note
You can position the universal cuff on either your knee
or elbow.
Before positioning the universal cuff, first clean the
body parts to be treated.
23