Biker Recognition Function - Cobra Spyball 6808-9 Bedienungsanleitung

Press push-button n. 1 of a transmitter (or press both transmitters in turn, if you want to pair two). The
LED illuminates shortly, to confirm that pairing has been successful.
Once the operation is completed, turn ignition off. If ignition remains on, the system will quit the pairing
procedure anyway. In both cases the exit from the procedure is confirmed by a short sharp audible
signal.
Important:
1) For security reasons, every system can accept a maximum of two remote transmitters.
2) Every pairing procedure disables the transmitters which the receiver had previously been paired
with. Therefore: if you have lost a transmitter and you wish to pair a spare one, do not forget that the
one which has remained in your possession has to be re-paired too (or it will stop working). If you do
not wish or you cannot pair a spare transmitter in a short time, re-pair the transmitter which has
remained in your hands: so doing you will disable the one you have lost.

3. BIKER RECOGNITION FUNCTION

Besides its operation as a conventional remote control key, the transmitter can be used in Biker Recognition
mode.This function is selectable.
When the Biker Recognition function is enabled, the transmitter sends a coded signal at regular intervals (1,5
secs). The small LED on the transmitter flashes at the same rate. In this configuration the security system
activates automatically as the transmitter goes beyond the range of the receiver, that is when the biker walks
away from the parked motorcycle with the transmitter in his/her pocket more than about 3 meters. Similarly it
deactivates when the biker returns to his/her vehicle and the transmitter signal reaches the receiver. For more
details regarding arming and disarming in Biker Recognition mode, please see also the information provided in
the paragraphs below.
___________________________________________________________________________________________________
SPYBALL 6808-9/6828-9 ENGLISH 24