Samsung Seag Swiss RS 7 Series Handbuch Seite 7

setting up your side-by-side
refrigerator
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on the purchase of your Samsung
Side-By-Side Refrigerator. We hope you will enjoy the
many state-of-the-art features and effi ciencies that
this new appliance has to offer.
Selecting the best location for the
refrigerator
• Select a location with easy access to the water
supply.
• Select a location without direct exposure to
sunlight.
• Select a location with level (or nearly level) fl ooring.
• Select a location with enough space for the
refrigerator doors to open easily.
• Overall space required in use. Refer to drawing and
dimension as below.
• Please ensure that appliance can be moved freely
in the event of maintenance & service.
at least 50 mm
DA68-02710R(0.1).indb Sec4:7 DA68-02710R(0.1).indb Sec4:7
Downloaded from www.Manualslib.com
25 mm
50 mm
at least 50 mm
160º 160º
1724 mm
manuals search engine
Spacer
Spacer(gray block)
installation
For better performance,
please certainly fi x the
spacer on the rear of unit when installing the
refrigerator. It is improving refrigerator performance.
Assembly Method
1. Take out packed spacer from the lowest guard of
the fridge.
2. Check assembly location at the rear of Refrigerator
like picture
3. Locate spacer assembly location and put spacer
on the rear plate of Refrigerator.
When moving your refrigerator
To prevent fl oor damage be sure the front levelling
legs are in the up position (above the fl oor). Refer to
'Levelling the refrigerator' in the manual (at page 11).
To protect the fi nish of the fl ooring, place the
protection sheet such as packing carton under the
refrigerator.
Leg
When installing, servicing or cleaning
behind the refrigerator, be sure to pull the
CAUTION
unit straight out and push back in straight
after fi nishing.
Spacer Spacer
Screw Driver
_7
setting up
2012.6.21 1:43:24 PM 2012.6.21 1:43:24 PM