Klarstein 10032157 Bedienungsanleitung Seite 19

Replacement and maintenance of air filter
When used regularly, the filter may become
clogged with dust and particles. Therefore the filter
should be cleaned every one or two weeks. Follow
these steps
1 Remove the filter by pulling it out carefully.
2 Clean the filter with a vacuum cleaner or with
water. Tap the filter to remove excess water
and let it dry completely. Once you make sure
that your filter is completely dry, re-install it
on your device. Do not wash your filter in the
dishwasher and never use hair dryers or
Genreral description
• The machine uses the temperature range of 5 ~35 , please use the machine
in this scope, (otherwise it will start the protection action, causing the machine
automatically stop running.)
• At room temperature at 5 and the absolute temperature of the environment is very
low. It is not necessary to use the machine.
• When the machine is running, it will produce a small portion of the heat, the room
temperature will be a little higher, this is a normal phenomenon, please feel at ease.
• If the unit automatically stop running, please send the water in the water drained,
and put back to the water tank, the machine will continue to operate.
• In order to ensure the normal operation, do not open the water tank float cover, or
place any foreign body in the water tank.
When the machine can not start or unknown cause, please check with the following
steps:
1 Ccheck whether the plug or the power cord is normal.
2 Above all is normally, just please re-start the machine after 10 minute.
3 If you are still unable to start, please contact the local dealer or the company's
customer service department.
EN
19