Ec Declaration Of Conformity - Gumotex RUBY Benutzerhandbuch

GB
EC – Declaration of Conformity
GUMOTEX, akciová společnost
Registered in Commercial Register at
Regional Court in Brno, section B, fi le. 413
PRODUCT: RUBY – INFLATABLE BOAT
RUBY is a universal, three-seat boat with an open transom for a multitude of purposes (pleasure cruising, fi shing,
etc.). It is used for environments of class up to WW2 – moderate diffi culty (medium rapids, irregular waves, weak
eddies and whirls, small rapids in heavily meandering or badly transparent watercourse). Paddling persons sit on
the seats and propel the boat using long canoe paddles or an outboard engine with a maximum power of 4kW. All
persons must wear life jackets. It is necessary to observe boating rules.
TYPE OF DRIVE:
Gumotex, a. s. has adopted measures at the level stipulated by EN ISO 9001, by which it assures conformity of all products
launched to the market with the technical documentation and with basic requirements.
The boat RUBY is included in design category D - „inland" – vessels designed for voyages on sheltered coastal waters, small
bays, small lakes, rivers and canals when conditions up to, and including, wind force 4 and signifi cant wave heights up to, and
including, 0,3 m may be experienced, with occasional waves of 0,5 m maximum height, for example from passing vessels.
LIST OF APPLIED DOCUMENTS AND STANDARDS:
94/25/EC European Parliament and Council Directive of 16 June 1994 on the approximation of the laws,
regulations and administrative provisions of the Member States relating to recreational craft
2003/44/EC European Parliament and Council Directive of 16 June 2003, amending Directive 94/25/EC on
the approximation of the laws, regulations and administrative provisions of the Member States
relating to recreational craft
EN ISO 6185-1 Infl atable boats - Part 1: Boats with a maximum motor power rating of 4.5 kW
EN ISO 10087 Small craft - Craft identifi cation - Coding system
EN ISO 10240 Small craft - Owner's manual
EN ISO 14945 Small craft - Builder´s plate
APPENDICES – DOCUMENTATION STORED WITH THE MANUFACTURER:
Technical documentation for assessment of conformity
Substitutes issue dated 11. 12. 2013
Author: L. Gasnárková, TI
Identifi cation data on the person authorized to sign on behalf
of the manufacturer: Ing. Vojtěch Hrubý, director of OZ3
38
MANUFACTURER:
Mládežnická 3062/3a
690 75 Břeclav
ID No.: 16355407
Outboard engine with a maximum power of 4 kW or long canoe paddles
Issued in conformity with European Parliament and Council
Directive 94/25/EC of 16 June 1994 on the approximation
of the laws, regulations and administrative provisions of the
Member States relating to recreational craft and European
Parliament and Council Directive 2003/44/EC of 16 June
2003, amending Directive 94/25/EC on the approximation
of the laws, regulations and administrative provisions of the
Member States relating to recreational craft.
In Břeclav on 17. 2. 2016
č.: III - 071