Hi/Lo Alert - Bresser 5-in-1 Comfort Bedienungsanleitung

DAILY
WEEKLY
MONTHLY
Select rainfall measurement unit (millimeter or inch)
1. Press and hold RAINFALL button for approx. 3 seconds to change to setting mode.
2. Press UP or DOWN button to change between mm (millimeter) and in (inch).
3. Finally press the RAINFALL button to save the settings and exit the setting mode.

16 HI/LO Alert

HI/LO alert are used to alert you of certain weather conditions. Once activated, an alarm sound is
triggered and the alert icon flashes as soon as a set value is reached. Supported areas and alarm
types:
Area
Indoor temperature
Indoor humidity
Outdoor temperature
Outdoor humidity
Rainfall (daily)
Wind speed
HI AL = High alert / LO AL = Low alert
*Daily rainfall since midnight
HI/LO alert setting
1. Press ALERT button until the desired area is selected.
2. Press UP or DOWN button to change the value.
3. Press ALERT button to confirm and continue to the next setting.
Enable/Disable HI/LO Alert
1. Press ALERT button until the desired area is selected.
2. Press ALARM button, to activate the alarm.
3. Press ALERT button to confirm and continue to the next setting.
Note:
1. The unit will automatically exit setting mode in 5 seconds if no button is pressed.
2. When ALERT alarm is on, the area and type of alarm that triggered the alarm will be flashing and
the alarm will sound for 2 minutes.
3. Press SNOOZE/LIGHT button when alarm sounds to interrupt the alarm. The alarm will then start
again after 2 minutes.
Data clearing
1. Press and hold HISTORY button for approx. 3 seconds.
2. Press UP or DOWN button to choose YES or NO.
3. Press HISTORY button to confirm. This will clear out any rainfall data recorded before.
32 / 44
Total rainfall rate within the current day, from midnight
Total rainfall rate for current week
Total rainfall rate for current month
Type of alert available
HI AL / LO AL
HI AL / LO AL
HI AL / LO AL
HI AL / LO AL
HI AL*
HI AL