Bresser 5-in-1 Comfort Bedienungsanleitung Seite 27

1 BARO button (display change between hPa,
InHg or mmHg as well as barometric pressure
type selection)
3 RAIN button (display change between daily,
weekly and monthly rainfall)
5 MAX/MIN button (switch between highest, low-
est or current value display)
7 INDEX button (display change between dew-
point, heat index and wind chill)
9 Wall mount
11 DOWN button (Value setting downwards)
13 RESET button (reset all settings)
15 SENSOR button (initializing sensor data recep-
tion)
17 HI/LO/AUTO switch (display brightness)
19 TIME SET button
21 ALERT button
23 Battery compartment (base device)
25 DC power adapter with EU mains plug.
27 Funnel (rainfall measurement)
29 Circular level (horizontal alignment)
31 Wind vane
33 Assembly bar
35 Aperture for vertical mounting
37 Mounting screw
39 Aperture for horizontal mounting
41 Fixing screw (battery compartment cover)
43 Aperture for the assembly bar in sensor head
45 Battery compartment (Remote sensor)
Scope of delivery
Base device (A), Power adapter (B), Remote sensor (C), Assembly bar with 2 screws and 2 nuts (D),
Tube bracket with 4 screws and 4 nuts (E), Assembly base (F)
Recommended batteries (not included)
3 pcs. Micro batteries (1.5V, AA type); 3 pcs. Mignon batteries (1.5V, AA type)
Also recommended (not included):
Small Philips screwdriver, 4 wood screws
2 WIND button (display change between average
and current gust)
4 ALARM/SNOOZE button (snooze function)
6 HISTORY button (retrieve measurements for the
past 24 hours)
8 Display
10 Wall mount adapter
12 UP button (Value setting upwards)
14 RRC button (initializing time signal reception)
16 °C/°F switch (display change between °C or °F)
18 Power output cable
20 ALARM button
22 Battery compartment cover (base device)
24 DC connection socket for coaxial/barrel con-
nector
26 DC coaxial/barrel connector
28 Antenna
30 Windmill (wind speed measurement)
32 Radiation shield
34 Assembly base
36 Tube bracket
38 Mounting screw and nut
40 Battery compartment cover (Remote sensor)
42 RESET button (reset all settings)
44 Function indicator (remote sensor)
46 Sealing ring
27 / 44