Led Status Feedback - GF EA15 Bedienungsanleitung

Instruction manual

5.3.2 LED status feedback

The LED status feedback shows the valve positions and the current status of the actuator.
The following table shows the color assignment of the LED:
LED status feedback on the actuator
The color assignments are valid in any case – even when colors have been inverted later by
customer. If the plant standard requires an inversion of the color assignment, the customer
can adjust this afterwards; see Chapter 9.3 "Inverting LED color assignment".
Color
Red
Green
Flashes white
Flashes yellow
Flashes blue
Turquoise
Design and function
Meaning
OPEN position
CLOSE position
Actuator moves
Error
Adjustment mode
Acknowledge color
inversion
41