Rhodius RH403S Originalbetriebsanleitung Seite 28

GB RH403S Original user manual
Environmental protection
Recycling and recovery instead of waste disposal
To avoid damage in transit, the machine must be shipped in sturdy packaging.
All packaging, accessories and the machine itself are made from recyclable materials and
should be handled appropriately.
All plastic parts on the machine are marked. This enables environmentally-friendly separation
into each type of waste at a local waste recycling depot.
For EU countries only
Electrical tools must not be disposed of in domestic waste!
mentations of this law require old electrical tools to be collected separately and transferred for
environmentally-friendly recycling/recovery.
Noise and vibration
Noise readings have been taken according to EN 60745.
Typical A-weighted emission sound pressure level for this electrical tool:
Hearing protection must be worn!
Vibration total values a
Vibration total value
The vibration level given reflects vibrations encountered for the intended use of the electrical
tool. If the tool is used for other applications, with different working attachments or if not
properly maintained, then the level of vibrations may differ considerably. All of the above can
To accurately assess the overall vibration load, times should also be taken into account when
the machine is switched off or is running but not actually being used normally (idling). These
Take additional safety precautions to protect the operator from the effects of vibrations, such
as proper maintenance of electrical tools and tool attachments, keeping hands warm, proper
organisation of working shifts, etc.
28
83 dB(A)
WA
PA
h
a 2,4 m/s
h
2
2
-