Rhodius RH403S Originalbetriebsanleitung Seite 23

RH403S Original user manual GB
Instruction for working with individual discs
The groove width results from the number and gauge of the spacer discs between the two
diamond cutting discs, plus the thickness of the cutting discs themselves.
The groove width can be calculated as follows:
Groove width = width of spacer discs + width of both cutting discs.
3
3
cutting discs.
diamond cutting disc according to achieve the
groove width that you want.
Guide the spindle and the clamping bolt
through the centre.
lock the working spindle.
bolt using the 6 mm Allen key.
The cutting depth must be approx. 3 mm
deeper than the desired groove depth to com-
pensate any inaccuracies of the cutting depth.
-
mer to remove the remaining webbing in the
material.
23