Rhodius RH403S Originalbetriebsanleitung Seite 24

GB RH403S Original user manual
Setting the cutting depth
4
To set the cutting depth, open the
quick-release lever.
turning the machine guard and then close the
quick-release lever.
During operation, ensure that the quick-release
Changing the tool
Assembly instructions:
Caution!
The diamond cutting discs, spacer discs and flange nut can become hot while you
are working.
You can easily burn your hands or cut/tear your skin on the cutting disc segments.
To avoid injury, always use work gloves when changing the tool
Warning!
Always unplug the machine before working on it!
5
Press the spindle lock button to lock
the working spindle.
Only use the spindle lock when the working
spindle is at standstill.
Otherwise, you may damage the
electrical tool.
6 mm Allen key to disengage the
clamping bolt, and then remove the diamond
cutting discs and the spacer discs from the
Clean the working spindle and all parts to be installed.
24
4
5