Valve Insert Removal / Installation; Taking Out The Valve - perrot hydra m Bedienungsanleitung

8

Valve insert removal / installation

Ensure sprinkler is not under pressure.
 Using a big screwdriver, unclip the lid
 Using a screwdriver, remove white retaining ring
Hollow screw
 Pull sprinkler insert out of the housing
8.1

Taking out the valve

 Take off retaining ring by help of retaining ring lifter (see chapter 4).
 Screw valve lifter / coarse filter wrench onto valve insert's studs and manually tighten.
 Pull out valve insert complete with valve lifter and unscrew. Valve insert is now held
on hollow screw by O-ring only.
TDP062d+e.doc
Perrot REGNERBAU CALW GmbH
Retaining ring
Retaining ring
Rev. 27.06.2013
Industriestraße 19-29 / D-75382 Althengstett / Germany
Telefon : +49-7051-162-0 / Fax : +49-7051-162–133
E-mail : perrot@perrot.de / E-mail Konstruktion : technik@perrot.de
Seite/Page 35 / 42