Calculate And Print Out Bmi; Transmit Measured Results To A Radio Receiver; Switch Off Scales - Seca 704 Bedienungsanleitung

BMI
Over 30
Calculate and print out
BMI automatically
Transmit measured
results to a radio

Switch off scales

50 •
The patient urgently needs to lose weight as this is put-
ting a strain on the metabolism, circulation and skeleton.
The recommendation is for careful adherence to a diet,
plenty of exercise and behavioural training. If in doubt, a
medical specialist should be consulted.
If you use these scales with a wireless printer and a
length measuring device from the
system, you can calculate and print out the BMI auto-
matically.
1. Carry out weighing.
2. Briefly press the Enter key (send/print) on the
scales.
The measured value is sent to the wireless printer
but not printed out.
3. Measure the height.
4. Hold down the Enter key (send/print) on the length
measuring device.
The measured value is sent to the wireless printer.
The BMI is calculated.
The height, weight and BMI will be printed out.
If the scales are integrated in a
work, you can transmit the measured results to
receive-ready equipment (wireless printer, PC with
receiver
wireless USB module) at the touch of a button.
Press the Enter key (send/print).
Press the Start key.
Evaluation
NOTE:
The prerequisite for this function is that the
equipment devices are logged into a wireless
group (see "seca 360° wireless Network" on
page 55).
– Press key briefly: Send measured results to
all receive-ready equipment
– Hold down: Print out measured result using
wireless printer
NOTE:
When in battery mode, the scales will switch off
automatically after a short period if no load is
placed on them.
seca 360° wireless
seca 360° wireless
net-