grabner TRAMPER Handbuch Seite 14

HANDlING + DETAIlS
as single seater:
TRAMPER
Your TRAMPER features 6 D-ring positions.
If you use the TRAMPER single handed, you
should mount the seat to the midships D-
rings only.
as single seater:
HOLIDAY 2
Your HOLIDAY 2 features 6 D-ring positions.
If you use the HOLIDAY 2 single handed, you
should mount the seat to the midships D-rings
only, and move the rear footrest forward.
as single seater:
HOLIDAY 3
Just take up your seated position midships of
your HOLIDAY 3 and move the rear footrest
forward.
as 3-seater:
HOLIDAY 3
Mount the front seat to the front D-rings and
the 3rd seat (accessory) to the next to last D-
rings. If you want a footrest bracket for the 3rd
person, you need the footrest bracket „Holi-
day 2 bow".
Using
EXPLORER 2
Take your seat at the rear seat position. Dis-
tributing weight to the rear somewhat shor-
tens the waterline length. To counter balance
that, you may stow accessories or other items
(i.e. water canister) below decks at the bow.
14
single handed:
as single seater:
MEGA
Mount the seat to the midship eyelets.
for single handed:
RIVERSTAR
Choose your seat position that the barycentre
are abaft the middle of the boat.
RIVERSTAR XXL
Mount the front seat in the front and the 3rd
seat (accessory) midships. If you want a foot-
rest bracket for the 3rd person, you need the
footrest bracket „Riverstar stern".
The correct seat position:
►
Take up an upright, slightly forward poin-
ting body posture in the boat.
►
Feet are V-pointing and arranged at an
angle just over 90 degrees.
►
Legs should be angled, with knees poin-
ting outward.
as 3-seater: