Functional Description; Intended Use; Product Features; Technical Data - Bosch GBH 5-40 DCE Professional Originalbetriebsanleitung

OBJ_BUCH-491-003.book Page 16 Friday, August 1, 2008 10:42 AM
16 | English

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for hammer drilling in
concrete, brick and stone as well as for chisel-
ling.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Dust protection cap
2 Locking sleeve
3 Mode selector switch
4 Vibration damper
5 On/Off switch
6 Thumbwheel for speed preselection/impact
frequency preselection
7 Service indicator
8 Stand-by indicator
9 Auxiliary handle
The accessories illustrated or described are not in-
cluded as standard delivery.
1 619 929 791 | (1.8.08)

Technical Data

Rotary Hammer
Article number
Rated power input
Rated speed min
Impact rate
– Drilling mode min
– Chiselling mode min
Impact energy per
stroke
– Drilling mode
– Chiselling mode
Chisel positions
Tool holder
Lubrication
Max. drilling dia.
– Concrete (with twist
drill)
– Concrete (with break-
through drill bit)
– Brickwork (with core
bit)
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
GBH 5-40 DCE
Professional
0 611 264 0..
W 1150
-1
170–340
-1
1500–2900
-1
1500–3050
J 2–10
J 2–11
12
SDS-max
Central
permanent
lubrication
mm 40
mm 55
mm 90
kg 6.8
/ II
Bosch Power Tools