VDO Cyclecomputing ms Bedienungsanleitung Seite 24

Setting the beeper: ON/OFF
SET – Open the menu:
– Scroll from Total values to Settings:
– Open the settings menu:
– Scroll to Beeper in the menu:
– Start the setting:
– Change the setting:
TPC BIKE
– Confirm the selection:
– Exit the settings menu:
46
Press and hold the SET button
Press the BIKE or TPC button
Press the SET button
Press the BIKE or TPC button
Press the SET button
Press the BIKE or TPC button
Press the SET button
Press and hold the SET button
Setting the total distance
SET – Open the menu:
– Scroll from Total values to Settings:
– Open the settings menu:
– Scroll to Total distance in the menu:
– Start the setting: Press the SET button
– Change the setting:
– Confirm the selection:
TPC BIKE
– Exit the settings menu:
ATTENTION:
you replace the battery.
Press and hold the SET button
Press the BIKE or TPC button
Press the SET button
Press the BIKE or TPC button
Press the BIKE or TPC button
Press the SET button
Press and hold the SET button
All data remains stored when
47