Scope Of Supply; Accessories; Introduction - HBM WI/5mm-T Montageanleitung

WI
1

Scope of supply

• Displacement transducer with fitted cable
• Operating Manual

1.1 Accessories

Mounting kit:
8mm mounting block and tool, order no.: 1−WZB8
2

Introduction

The WI series of inductive miniature displacement transducers is designed to
be particularly compact. The transducers feature a clamping shaft of only 8
mm and an extremely short total length.
Interrelationship between nominal displacement and total length: The
transducer with the nominal displacement of 2 mm is only 66 mm long, for the
nominal displacement of 5 mm the length is 79 mm and for a nominal
displacement of 10 mm only 95 mm.
For reciprocating measurement objects or if no other means exist, the probe
versions are used.
The probe pin with the plunger is easily installed in a guideway, being not only
free from backlash and non wearing, but also spring loaded to keep it pressed
against the measurement object.
WI inductive miniature displacement probes are therefore suitable as
precision measuring probes in measurement stands and measuring
apparatus.
A1028 3.1 de/en/fr
25
HBM