Temperature Display; Prior To Initial Start-Up; Starting Up And Temperature Regulation - AEG SANTO SK91000-5I Gebrauchsanweisung

present in the refrigerator. The ACTUAL temperature is indicated by
continuously illuminated numbers.

Temperature Display

• During normal operation, the temperature currently present in the
refrigerator (ACTUAL temperature) is displayed.
• When the temperature is being adjusted, the temperature currently
set flashes (DESIRED temperature).
Prior to Initial Start–Up
Please clean the appliance interior and all accessories prior to initial
start-up (see section: "Cleaning and Care").

Starting up and temperature regulation

1. Insert the plug into the plug socket. When the refrigerator compart-
ment door is opened, the internal lighting is switched on.
2. Press ON/OFF button.
The green mains pilot indicator illuminates.
3. Press either the „+" (WARMER) or „-" (COLDER) button.
The temperature display switches over and the DESIRED temperature
currently set flashes on the temperature display.
4. Set the required temperature by pressing the „+" (WARMER) or „-"
(COLDER) buttons (see section "Temperature setting buttons"). The
temperature display will immediately show the changed setting. With
each further press of one of the two buttons, the DESIRED tempera-
ture is adjusted by 1°C. Adjustable temperature range: +2°C to +8°C.
Note: From a food
partment should be considered cold enough as a storage temperature.
5. Once the required temperature has been set, after a short period
(approx. 5 sec.) the temperature display will change and again indicate
34
The temperature display can indicate several pieces of
information.
safety point of view, +5°C for the refrigerator com-