Operating The Appliance; Setting The Heat Setting; Switching The Multi-Purpose Zone On And Off - AEG Electrolux 67670 M-MN Gebrauchsanweisung

Operating the appliance

3
Use the induction cooking zones with suitable cookware.
3
When a cooking zone is switched on, it may hum briefly. This is a char-
acteristic of all ceramic glass cooking zones and does not impair either
the function or the life of the appliance.

Setting the heat setting

The heat can be set at 15 different levels (including intermediate set-
tings) using the ring switches:
Intermediate settings are available between heat settings 2 to 7. These
are designated in the digital display with a decimal point.
To increase
To decrease
To switch off
3
Please follow the instructions from the manufacturer of the combina-
tion appliance as well.

Switching the multi-purpose zone on and off

With the multi-purpose zone the heating surface can be matched to
the size of the cookware.
Roasting zone
To switch on outside ring
To switch off outside ring Touch
26
Ring switch
turn clockwise
turn anti-clockwise
set to zero
Sensor panel
Touch
onds
for 1-2 seconds
Power indicator
for 1-2 sec-
Display
to
to
/
is lit
goes out