ELPRO ECOLOG TN2 Anleitung Seite 8

ECOL ECOL OG TNx, TPx, THx f OG TNx, TPx, THx f
ECOL ECOL OG TNx, TPx, THx f ECOL OG TNx, TPx, THx f OG TNx, TPx, THx f or Ex Applica
1. Standards
Dataloggers belonging to the ECOLOG series have the following EC-type examination certificate:
SEE 00 ATEX 3115
II 2 G
Ex ib IIB T4
Anschlussdaten des eigen. Steckers:
Securité intrinsèque interface:
Con. data of the intrinsically safe interface:
Manual EZ-7003B
SEE 00 ATEX 3115
II 2 G
Ex ib IIB T4
It is compulsory that the product under consideration has CE conformity marking.
The manufacturer guarantees that this product conforms with the relevant directives.
EN 61000-6-2:2006 and EN 61000-6-4:2006
This product has to be disposed according to WEEE!
(Waste electrical and electronic equipment, 2002/96/EC)
2. 2. 2. 2. 2. K K K K K e e e e e y to the Intrinsically Saf y to the Intrinsically Saf y to the Intrinsically Saf
y to the Intrinsically Saf y to the Intrinsically Safe Ex - T
Type Function
TN2 2 x Temperature NTC
TN3-P 3 x Temperature NTC
TN4 4 x Temperature NTC
TN4-L 4 x Temperature NTC
Seite - 8
ECOLOG Ex
1258
SEE
Certification authority in Luxembourg which certifies the Ex
examination carried out by Electrosuisse
00
Year of issue of certificate 2000
ATEX
Identifies the use of council directive 94/9/EC
3115
Certification number for this group of Elpro products
I I
Equipment group II intended for use in all potentially explosive
atmospheres apart from mines
2
Category 2, suitable for use in zone 1 (occasional explosion
hazard) as well as in zone 2 (rare explosion hazard)
G Atmosphere with explosion hazard arising from gases and vapors
but not from dust
Ex Explosion protection type according to European directives:
EN 60079-0:2006 and the directives for special
types of protection against ignition
ib
Type of protection for intrinsic safety against ignition: category ib
with 1 failure according to EN 60079-11:2007, EN 1127-1:2007
IIB
Use in all potentially explosive atmospheres apart from mines:
group II sub-clause B
T4
Temperature class T4: max. surface temperature 135°C with a
safety margin of 5 kelvin for permanently hot surfaces
T4 applies for compound materials with an ignition temperature of
t > 135°C, essentially ethyl ether and ethanal, which are used
for industrial production of synthetics and solvents.
Part No.
2420-EX
2420-PEX
2421-EX
2422-EX
or Ex Applica or Ex Applica
or Ex Applica or Ex Applica tions
e Ex - T e Ex - T ype ype
e Ex - T e Ex - Type ype ype
Measurement Range
int. -35°C.. 55°C or ext. -50°C.. 140°C
int. -35°C.. 55°C or ext. -50°C.. 140°C
-50°C.. 140°C
-50°C.. 140°C
tions tions
tions tions
D-EZ-7003Bh
5. 2009AG