Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones changes between two
levels.
4.12 Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infra — red signal communicator.
Speed of the fan is defined automatically
on basis of mode setting and
temperature of the hottest cookware on
the hob. You can also operate the fan
from the hob manually.
For most of the hoods the
remote system is originally
deactivated. Activate it
before you use the function.
For more information refer to
hood user manual.
Operating the function automatically
To operate the function automatically set
the automatic mode to H1 – H6. The hob
is originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
automatically and adjusts the speed of
the fan.
Automatic modes
Auto‐
matic
light
Mode
Off
H0
Mode
On
H1
Mode
On
3)
H2
Mode
On
H3
Mode
On
H4
Mode
On
H5
Mode
On
H6
1) The hob detects the boiling process and
activates fan speed in accordance with au‐
tomatic mode.
2) The hob detects the frying process and
activates fan speed in accordance with au‐
tomatic mode.
3) This mode activates the fan and the light
and does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
for 3 seconds. The display
comes on and goes off
3. Touch
for 3 seconds.
4. Touch
a few times until
on.
5. Touch
of the Timer to select an
automatic mode.
To operate the hood directly
on the hood panel deactivate
the automatic mode of the
function.
ENGLISH
11
Boil‐
2)
Frying
1)
ing
Off
Off
Off
Off
Fan
Fan
speed 1
speed 1
Off
Fan
speed 1
Fan
Fan
speed 1
speed 1
Fan
Fan
speed 1
speed 2
Fan
Fan
speed 2
speed 3
comes
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
