Programmes; Before First Use - Progress PI1315 Benutzerinformation

16 progress
Programme knob
5
Indicators

PROGRAMMES

1)
Programme
2)
3)
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the programme duration and the consumption values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. (This is the standard programme for test institutes).
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

BEFORE FIRST USE

1. Make sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water
softener. Contact your local water au-
thority to know the water hardness in
your area.
2. Fill the salt container.
Adjusting the water softener
German
degrees
(°dH)
51 - 70
Washing phase indicator.
Drying phase indicator.
End indicator.
Salt indicator. This indicator is off while the programme oper-
ates.
Degree of soil
Type of load
Normal soil Prewash
Crockery and cut- Wash 65 °C
lery Rinses
Dry
Fresh soil Wash 65 °C
Crockery and cut- Rinse
lery
Normal soil Prewash
Crockery and cut- Wash 50 °C
lery Rinses
Dry
Water hardness
French
degrees
(°fH)
91 - 125
Description
Programme Duration
phases
100 - 110
30
130 - 140
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the ap-
pliance. Start a programme to remove
them. Do not use detergent and do not
load the baskets.
mmol/l Clarke
degrees
9.1 - 12.5 64 - 88
Energy
(min) (kWh)
1.4 - 1.6
0.9
1.0 - 1.2
Water softener
adjustment
Manual
1)
2
Water
(l)
19 - 21
9
14 - 16
Elec-
tronic
10