Herunterladen Inhalt Inhalt Diese Seite drucken

Setting And Starting A Washing Programme; Washing Programmes - Progress PI1310 Benutzerinformation

Vorschau ausblenden Andere Handbücher für PI1310:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Different brands of detergent dissolve in
different times. Some detergent tablets
do not have the best cleaning results

Setting and starting a washing programme

Do these steps to set and start a washing
programme:
1. Close the door.
2. Turn the programme knob to set the
washing programme. Refer to the chap-
ter 'Washing programmes'.
– The on/off indicator light comes on.
– The phase indicator light or lights for
the washing programme start to flash.
3. Press the start/cancel button.
– The washing programme starts auto-
matically.
– The start/cancel indicator light comes
on.
– When the programme starts, only the
indicator light of the phase in progress
stays on.
When the washing programme oper-
ates, you cannot change the pro-
gramme. Cancel the washing pro-
gramme.
Warning! Only interrupt or cancel a
washing programme if necessary.
Caution! Open the door carefully. Hot
steam can come free.
Cancelling a washing programme
Press and hold the start/cancel button until
the start/cancel indicator light goes off and
the phase indicator lights start to flash.

Washing programmes

Washing programmes
Programme
1)
Degree of
Type of load
soil
Crockery, cutlery,
Normal soil
pots and pans
Normal or light
Crockery and
soil
during short washing programmes. Use
long washing programmes when you
use detergent tablets to fully remove the
detergent.
The washing programme is cancelled.
• At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme.
Fill the detergent dispenser with detergent
before you set a new washing programme.
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point
of interruption.
End of the washing programme
Switch off the appliance in these conditions:
• The appliance stops automatically.
• The end indicator light comes on.
Let the dishes cool down before you remove
them from the appliance. Hot dishes are
easily damaged.
Removing the load
• First remove items from the lower basket,
then from the upper basket.
• There can be water on the sides and door
of the appliance. Stainless steel becomes
cool more quickly than the dishes.
Programme description
Prewash
Main wash up to 65°C
2 intermediate rinses
Final rinse
Drying
Main wash up to 65°C
cutlery
Final rinse
progress 61

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis