IKEA RENLIG DWTI60 Bedienungsanleitung Seite 12

ENGLISH
• Before you load cutlery and dishes, do
these steps:
– Remove all food remainings and deb-
ris.
– Make burnt, remaining food in pans
soft.
• While you load cutlery and dishes, do
these steps:
– Load hollow items (e.g. cups, glasses
and pans) with the opening down.
– Make sure that water does not collect
in the container or in a deep base.
– Make sure that cutlery and dishes do
not lie inside one another.
– Make sure that cutlery and dishes do
not cover other cutlery and dishes.
– Make sure that glasses do not touch
other glasses.
– Put small objects in the cutlery basket.
• Plastic items and pans with non-stick
coatings can keep water droplets. Plastic
items do not dry as well as porcelain and
steel items.
• Put light items in the upper basket. Make
sure that the items do not move.
Caution! Make sure that the spray
arms can move freely before you start
a washing programme.
Warning! Always close the door after
you load or unload the appliance. An
open door can be dangerous.
Arrange service
dishes and large
lids around the
edge of the lower
basket.
The rows of prongs
in the lower basket
can be flat to load
pots, pans and
bowls.
Use the cutlery
grids. If the dimen-
sions of the cutlery
prevent use of the
cutlery grids, re-
move them.
12
The cutlery basket
has two parts. To
disassemble the
parts, move them
horizontally, in op-
posite directions
and pull them
apart. To assemble
the parts, put them
together and move
them horizontally to
each other.