VOLTCRAFT 3001000 Bedienungsanleitung Seite 18

• Always disconnect the power supply:
– before changing attachments
– before changing work pieces
– before maintenance jobs
– while the equipment is not in use.
• Before commencing work, test the operability of the equipment
and the tools. Never work with damaged or blunt tools.
• Before commencing work, check that the equipment is mounted correctly
(e.g. check screwed joints).
• Firmly clamp the work piece into position.
• Ensure that the equipment is firmly supported and that you are standing
in a stable position and on firm ground.
• When using equipment and tools be sure to follow the data that
is specified on the product, the packaging or in the operating instructions
concerning minimum/maximum speeds and the rotation direction.
• The tools should only be used for their intended purpose.
• Never remove any protective devices.
• Make sure that your clothes fit tightly, do not wear gloves and protect
your hair.
• Keep the drill's connecting cable away from the working space. Damaged
or entangled cables will increase the risk of an electric shock.
• Protect your ears when carrying out work which pro duces a high level
of noise.
• Wear safety goggles and protection for the mouth and nose when
carrying out work which produces dust, shavings, fumes or sparks.
• Never work towards your body.
• Never reach into the equipment while it is in operation.
• Ensure that all electrical equipment is protected against damp, dust
and humidity.
• Keep children away from your workshop and store your equipment
and tools in a safe place.
• Never allow inexperienced persons to work with your equipment
and tools without instruction or supervision.
• Always plan your work carefully and be sure to maintain concentration.
• Keep your workplace neat and tidy.
• Do not attempt modifying or retrofitting the product.
• Use only spare parts from wolfcraft
t
® .
18