Maintenance And Repair; 10.1 Maintenance - Eisemann HSE 7 LED Betriebsanleitung

10

Maintenance and repair

Unauthorized work being performed on the device!
Risk of injuries and material damage!
• Work performed on the device must only be carried out by appropriately

10.1 Maintenance

Observe the relevant national regulations in the country of use.
• Consult the relevant national regulations to determine the type and extent of
inspections.
• Adapt inspection intervals to the operating conditions.
The following tests and measures must be carried out during regular maintenance.
Check
the permissible ambient temperature
the enclosure components for formation of
cracks and damage.
its intended use
FM074342
2014-07-21·BA00·III·en·03
authorized and trained personnel.
Maintenance and repair
WARNING
Measures
If exceeding the permissible ambient
temperature or falling below the device
must be taken out of operation.
Replace the exchangeable enclosure
components. If the enclosure components
are non-exchangeable, the device must be
taken out of operation.
If the device is not used according to its in-
tended use, it must be taken out of
operation.
Portable Lamp
HSE 7 LED / LS 7 LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
19