Safe Use; Intended Use; Modifications And Alterations; Function And Device Design - Eisemann HSE 7 LED Betriebsanleitung

3.2

Safe use

• Read and observe the safety notes in these operating instructions!
• Observe characteristic values and rated operating conditions on the rating and data
plates!
• Observe additional information plates on the device!
• Use the device in accordance with its intended and approved purpose only!
• We cannot be held liable for damage caused by incorrect or unauthorized use or by
non-compliance with these operating instructions.
• Before installation and commissioning, make sure that the device is not damaged!
• Work on the device (installation, maintenance, overhaul, repair) may only be carried
out by appropriately authorized and trained personnel.
3.3

Intended Use

The portable lamp HSE 7 LED is equipment
• for mobile applications
• usable in a motor vehicle
• for use in Zones 1, 21, 2, 22 and in the safe area
• can be used indoors and outdoors
3.4

Modifications and alterations

Danger due to modifications and alterations to the device!
Explosion protection is impaired!
• Do not modify or change the device.
• No liability or warranty for damage resulting from modifications and
4

Function and device design

Danger due to improper use!
Explosion protection is impaired!
• The device may only be used according to the operating conditions
4.1

Function

• To switch on, switch off, dim and make main light with LED flash
• To switch on and switch off secondary light with LED
• Emergency lighting function in connection with charging unit
• The emergency lighting function can be deactivated and activated
• To charge the battery via the charging unit
• Battery capacity test
FM074342
2014-07-21·BA00·III·en·03
alterations.
described in these operating instructions.
Function and device design
WARNING
WARNING
Portable Lamp
HSE 7 LED / LS 7 LED
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
5