Emergency Light Operation; Charging Operation - Eisemann HSE 7 LED Betriebsanleitung

Operation
EN
9.2

Emergency light operation

EN
EN
EN
EN
EN
EN
EN
EN
Charging unit
EN
• Connect to the supply voltage.
EN
• The "Power" LED is lit.
• Insert the portable lamp.
EN
Portable lamp
EN
• Any switched-on LED will be switched off.
EN
• A functional test will be carried out.
• The LED display shows information on the charging state or possible faults.
EN
• In case of power failure, the portable lamp is switched on.
EN
EN
9.2.1 Switching the emergency light mode on and off
EN
EN
EN
EN
EN
EN
EN
EN
• Switch the main light on.
• Press button again and keep it pressed.
• With the pushbutton depressed, insert the portable lamp into the charging unit and
keep pressing the button until the LED signals the switchover.
red
9.3

Charging Operation

14
Portable Lamp
HSE 7 LED / LS 7 LED
Danger when used in hazardous areas!
The explosion protection is impaired!
• Use the charging unit in safe areas only.
In connection with the charging unit, the portable lamp can be used as
emergency light fitting.
In case of power failure, the main light will be switched on undimmed.
Upon delivery, the "Emergency light mode" function is on.
With the function switched off and in case of power failure, the following states
will be activated at the portable lamp.
Before insertion into the charging unit In case of power failure
Main LED and secondary LED - OFF Main LED and secondary LED - OFF
Main LED - ON
Main LED - DIMMED
Main LED - FLASHING
Secondary LED - ON
green green green green Description
Danger when used in hazardous areas!
The explosion protection is impaired!
• Use the charging unit in safe areas only.
WARNING
Main LED - ON
Main LED - ON
Main LED - FLASHING
Secondary LED - ON
Emergency lighting function off
Emergency lighting function on
WARNING
FM074342
2014-07-21·BA00·III·en·03