Rear Spacers; Door Reversibility - AEG S74300DSM0 Benutzerinformation

34
Installation

Rear spacers

Inside the appliance you find two spacers
which must be fitted as shown in the figure.
Slacken the screws and insert the spacer under
the screw head, then retighten the screws.

Door reversibility

WARNING!
Before carrying out any operations, remove the mains plug from the power socket.
To carry out the following operations, we suggest that this be made with another person
that will keep a firm hold on the doors of the appliance during the operations.
To change the opening direction of the door, do these steps:
1. Remove the upper hinge taking care
for the upper door not to fall off and
keep it for future actions.
2. Remove the upper door.
3. Remove the upper support and install
it in the opposite side.