Identification Of The Parts; Mounting; Cable Adjustment - Texas A/S 4675 W Bedienungsanleitung

If the machine unused for a period of time, please
refer to the instructions in this manual.
Maintain or replace safety and instruction labels, as
necessary.
Only use orginal spare parts or accessories. If not
orginal parts or accessories is used, the liablility is
no longer applied.
Miscellaneous
The motor is not pre-filled with oil.
Always before start check the engine oil level.
Factory-fitted control devices, such as the handle-
mounted clutch cable, must not be removed or
exposed.
Only drain the fuel tank outdoors. Gasoline is
extremely flammable and the fumes are explosive.
Ensure that the machine is properly secured when
transported on a flatbed etc.
The lawnmower is manufactured according to the latest
safety requirements. These include a blade brake that
stops the motor and blade in 3 seconds when the blade
brake. Every precaution is only effective when it is
followed exactly. Use the following description when
you mount your lawnmower.

Identification of the parts

See Illustration 1
Notice: the illustrations may vary from your present
model
A. Handlebar for engine brake
B. Recoil starter
C. Handlebar for drive *
D. Oil cap
E. Gasoline filling cap
F. Air Filter
G. Spark plug
H. Grass collector
I. Adjsutment of handlebar height
J. Height adjustment
K. Exhaust
L. Primer
M. Turnable frontwheel
* May vary from your actual model.

Mounting

Unpacking:
Remove the mower from the box by pulling the machine
out form the side. The box contains:
•
Lawn mower
•
Grass collector
•
Handlebar
Warning: Ensure that cables are not pinched.
Mounting the handlebar: Illustration 2
Lift upper handle and align it with lower handle.
Fold the fix handle grip to lock the handlebars together.
Mount the handle to the deck of the lawn mower, by
using the included bolts, washers and nuts.
Handlebar and height adjustment: Illustration 3
The handlebars are height adjustable. This means that
they can be adjusted so that it best fits you. Before you
install the handlebar, it may be a good idea to have
decided which height is best for you.
1. Set the lower handlebar tube to the working height
that suits you.
2. Customize cable and secure with cable clamps
Mounting the front wheel: Illiustration 4
A. Insert shortest bolts in top holes. Insert longest
bolts in lowest holes.
B. Attach front bracket, and tighten bolts.
C. Mount plastic cover tighten bolts.
Mounting the engine brake cable:
1. Gently push the top handlebar (Ill. 1A) forward
2. Insert the engine brake cable from the outside, into
the hole in the bracket on handlebar and lock.
Mounting the drive cable:
1. Gently push the lower handlebar (Ill.1C) downward
2. Insert the drive cable from the inside, into the hole
in the bracket on handlebar and lock.
Mounting the recoil-starter:
1. Pull the engine brake handlebar and hold in order
to release the starter cord on the engine.
2. Pull gently the starter cord from the engine
(Engine brake handlebar MUST be hold)
3. Attach the starter grip on the rack of handlebar.
4. Release the engine brake handlebar and the
starter grip.
Mounting the grass collector:
1. Click the frame to the grass collector.
The grass collector comes with a handy indicator
showing whether the box is full of grass and needs
emptying.
Mulching plug: Illustration 5
1. Insert the mulching plug and remove side
discharge guard, if you want to mow with mulching
functionality.
NB Don't use the grass collector
Important: Remember to remove the mulching plug,
when using the grass collector.
Side discharge guard: Illustration 6
1. Pull the pin and lift the side guard up and insert
side discharge guard. Then insert the mulching
plug in rear discharger to mow with side discharge
function. NB Don't use the grass collector

Cable adjustment

Before the machine is being used, the cable adjustment
should always be checked.
The cables can be checked by activating the handles
fully and check if the cable is tight. If not, it must be
tightened. If the handle cannot easily be fully activated,
the cable should be loosened.
After first season, it must be expected that the cables
need to be adjusted for optimal activation, as cables
can stretch when used.
13