Klauke EKP 1 Bedienungsanleitung Seite 29

Instruction manual EKP 1
_______________________________________________________________________________________________________________________
Attention
The crimping process can be interrupted at any moment by releasing the trigger.
By sliding the retract slide (Pos.-No. 2) in the direction of the battery (Pos.-No. 5) the dies can
be retracted in case of an error or emergency. (picture 3 Pos B)
The crimping cycle is terminated when the dies are completely closed and the max. crimping
force is reached which is indicated by the auto retraction of the piston.
Attention
After having terminated the crimping process and prior to changing the
dies/tool heads remove battery (Pos.-No. 5) to avoid unintended starts.
Instruction manual EKP 1
__________________________________________________________________________________________________________________
Attention
The crimping process can be interrupted at any moment by releasing the trigger.
By sliding the retract slide (Pos.-No. 2) in the direction of the battery (Pos.-No. 5) the dies can
be retracted in case of an error or emergency. (picture 3 Pos B)
The crimping cycle is terminated when the dies are completely closed and the max. crimping
force is reached which is indicated by the auto retraction of the piston.
Attention
After having terminated the crimping process and prior to changing the
dies/tool heads remove battery (Pos.-No. 5) to avoid unintended starts.
page 29
page 29