Taking A Measurement - Braun BP 1650 Bedienungsanleitung

6071360_BP1650_MN_KAZ Seite 17 Donnerstag, 26. Juli 2007 9:45 09
• Hold the monitor at heart level.
• Wait approximately 3 minutes before repeating a

Taking a measurement

1. Fasten the monitor on the palm side of your wrist,
2 cm
2. Press the red start/stop button (D).
3. Hold the monitor at heart level.
measurement.
roughly 2 cm below the palm line.
Make sure that the cuff (G) fits tightly.
The measurement starts automatically. While measure-
ment is in progress, do not move or speak.
17