Safety Warnings; Maintenance - Pearpoint P340 Bedienungsanleitung

SaFETy waRNINGS
the system is not earthed. if mains operated equipment is connected
to the system then the external equipment must be earthed in
accordance with the manufacturer's instructions. Failure to comply
with this may cause the unit to become live and be a lethal hazard.
DO NOt USe the P340 flexiprobe system in potentially explosive
environments. this equipment is NOt approved for use in hazardous
Locations.
Pushrod reels are heavy. Use the wheels (P342 and P343 models) to
assist transport. Observe heavy-lifting safety practices when lifting
the reel.
Foul water systems can be a source of biological hazards. Wear
appropriate protection when handling the P340 controller and the
pushrod reel and camera.
the camera will get hot during use. this is normal. exercise care when
handling the camera at all times.

Maintenance

Clean and sanitize the P340 flexiprobe system at regular intervals and after
conducting an inspection.
The P340 flexiprobe system contains no user serviceable parts; do not
dismantle any component of the P340 flexiprobe system, including the
controller, reel and camera.
Pearpoint recommends that only authorized service centers carry out
service of this product. Service elsewhere will invalidate the manufacturer's
warranty.
For information regarding any service needs, please visit:
www.radiodetection.com or contact your local Pearpoint representative
or dealer.
Training
Pearpoint provides training services for most Pearpoint products. Our
qualified instructors will train equipment operators or other personnel
at your preferred location or at Pearpoint headquarters.
For more information go to www.radiodetection.com or contact your
local Pearpoint representative.
11