The Automatic Heat Up; Power Function; Power Management - AEG Electrolux HE634200XB Benutzerinformation

24
Operating instructions
• You use not correct cookware. The symbol
vates automatically after 2 minutes.
• You do not deactivate a cooking zone or change the heat setting. After some time,
comes on and the appliance deactivates. See the table.
The times of Automatic Switch Off
The heat setting
The cooking zone
deactivates after

The Automatic Heat Up

You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
table in the chapter: Helpful hints and tips),
and then decreases to the necessary heat
setting.
To start the Automatic Heat Up function for
the cooking zone turn the knob clockwise
until the display shows
diately the necessary heat setting. After 2
seconds comes on.
To stop the function turn the knob counter-
clockwise and set a lower heat setting.

Power function

The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After, that the induction cooking zone auto-
matically sets back to heat setting 9. To activate, set the heat setting with knobs, than
touch ,

Power management

The power management divides the power be-
tween two cooking zones in a pair (see the illus-
tration). The power function increases the power
to the maximum level for one cooking zone in the
pair. Automatically decreases the power in the
second cooking zone to a lower level. The display
for the reduced zone change between two levels.
-
6 hours
. Then set imme-
comes on. To deactivate, change the heat setting.
comes on and the cooking zone deacti-
-
5 hours 4 hours
11
10
9
8
7
6
5
4
3
2
1
0
1 2
-
1.5 hours
3 4 5 6 7 8 9