The Heat Setting; Activation And Deactivation Of The Outer Ring; Automatic Heat Up; Power Function - AEG Electrolux HK634150XB Benutzerinformation

8
Operating instructions
• You do not deactivate a cooking zone or change the heat setting. After some time,
comes on and the appliance deactivates. See the table.
The times of Automatic Switch Off

The heat setting

The cooking
zone deactivates
after
The heat setting
Touch to increase the heat setting. Touch
shows the heat setting. Touch

Activation and deactivation of the outer ring

You can adjust the surface you cook to the dimension of the cookware.
To activate the outer ring touch the sensor field
Do the procedure again to deactivate the outer ring. The indicator goes out.

Automatic Heat Up

You can get a necessary heat setting in a shorter
time if you activate the Automatic Heat Up func-
tion. This function sets the highest heat setting
for some time (see the illustration), and then de-
creases to the necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch
display.
2. Immediately touch
on in the display.
3. Immediately touch
the necessary heat setting comes on. After 3
seconds
To stop the function touch

Power function

The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After, that the induction cooking zone auto-
matically sets back to highest heat setting. To activate, touch
vate, touch
-
6 hours
and
. The symbol comes on in the
. The symbol
again and again until
comes on in the display.
.
or .
-
5 hours 4 hours
to decrease the heat setting. The display
at the same time to deactivate the cooking zone.
. The indicator comes on.
11
10
9
8
7
6
5
4
3
2
comes
1
0
1
-
1.5 hours
2 3 4 5 6 7
, comes on. To deacti-
8 9