What To Do If; Labels Supplied With The Accessories Bag - ZANKER ZKE320 Benutzerinformation

What to do if...

Problem
The appliance does not operate.
The cooking zone does not heat up. • Make sure that the appliance is plugged in and the electrical supply is
The effectiveness of the hob is not
satisfactory.
If there is a fault, first try to find a solution to the prob-
lem yourself. If you cannot find a solution to the prob-
lem yourself, speak your dealer or the local Service
Force Centre.
If you operated the appliance incorrectly, or the
installation was not carried out by a registered en-
1
MOD.
PROD.NO.
SER.NO
DATA
MODEL
Stick it on Guarantee Card and send this part
1
Stick it on Guarantee Card and keep this part
2
Stick it on instruction booklet
3
• Examine the fuse in the electrical system of the house in the fuse box.
If the fuses blow time after time, speak to an authorised electrician.
switched on.
• Make sure that you turn the correct control knob.
• Examine the fuse in the electrical system of the house in the fuse box.
If the fuses blow time after time, speak to an authorised electrician.
• Make sure that the hob is clean and dry.
• Make sure that the cookware is the correct size for the cooking zone.
• Make sure that the cookware has a flat bottom.
• Make sure that the heat setting is correct for this type of cooking.
2
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
MODEL
Possible cause and remedy
gineer, the visit from the customer service technician or
dealer may not take place free of charge, even during
the warranty period.

Labels supplied with the accessories bag

Stick the adhesive labels as indicated below:
3
MOD.
PROD.NO.
0049 SER.NO.
These data are necessary to help you quickly and
correctly. These data are available on the supplied
rating plate.
• Model description .................
• Product number (PNC) .................
• Serial Number (S.N.) .................
TYPE
230V-50Hz
IP20
15