Product Description; Operation - ZANKER ZKE320 Benutzerinformation

the hob and the oven must be installed separately for
safety reasons and to let easy remove oven from the
unit.

Product description

Cooking surface layout
Electric cooking zones control knobs
Symbol
0

Operation

To switch on and increase the heat setting turn the
knob counterclockwise. To decrease the heat setting
turn the knob clockwise. To switch off turn the knob to
the 0.
Power indicator is activated when either of the zones
are turned on, and will stay on until the cooking zones
are switched off.
Before first use
Put cookware containing water on each cooking zone,
set the maximum position and operate the appliance for
10 min. This is to burn off the residue in the appliance.
After that, operate the appliance at minimum position
1
180
mm
145 2
mm
3
4
Function
off position
50 cm
360 cm
Rear cooking zone 1500 W
1
Front cooking zone 1000 W
2
Power indicator
3
Control knobs
4
Symbol
1
6
for 20 min. During this period, an odour and smoke can
occur. This is normal. Make sure that the airflow is suffi-
cient.
Rapid hot plate
A red dot in the middle of the plate shows a rapid hot
plate. A rapid hot plate heats up faster than usual
plates.
The red dots are painted on the plates. They can deteri-
orate during use and even disappear completely after a
period of time. It does not have an effect on the per-
formance of the appliance.
2
120 cm
180 cm 2
2
Function
minimum heat
maximum heat
2
13