Renkforce DB-L6F Bedienungsanleitung Seite 34

The following table provides information about the effects of the settings on the individual DMX channels.
DMX channel DMX Value
1 000-009
010-255
2 000
001-255
3 000-020
021-127
128-255
4 000-009
010-255
5 000
001-255
6 000
001-255
7 000
001-255
Ensure that the tank never runs empty during fog operation. Should this happen nevertheless,
turn the fog machine off immediately using the mains switch (1) and let it cool down.
Refill the tank after cooling.
If no fog emerges, the device is still warming up or reheating (the display (2) shows UP and the
indicator LEDs on the wired remote control are not lit).
Slight fog lag after deactivation/disconnection of a device is normal and does not suggest a
defect.
If you no longer require the device, disconnect the mains plug and let the device cool down.
Then empty the tank if the device is not used for any extended period. This prevents leaking of fog
liquid during transport or storage.
34
Function
No fog
Fog emission
Lights off
Brightness setting dark > bright
Brightness setting with channels 5, 6, 7
Fixed colour settings
Colour change slow > fast
Strobe effect off
Strobe effect slow > fast
Lights off
Brightness red dark > bright
Lights off
Brightness amber dark > bright
Lights off
Brightness blue dark > bright