Küppersbusch IKE309-6-2T Benutzerinformation Seite 22

22
Switching off
The appliance is shut off by pressing ON/
OFF switch for more than 1 second.
After this, a countdown of the temperature
from -3 -2 -1 will be shown.
When the appliance is switched off, Display
also goes off.
Temperature Indication
Each time the Fridge-Freezer temperature
indication button is pressed, the display in-
dicates in sequence:
1. – The Fridge compartment indicator is
on.
– The display indicates the fridge tem-
perature.
2. – The Freezer compartment indicator is
11)
on.
– The display indicates the freezer tem-
perature.
In any case, after 10 seconds normal dis-
play conditions are restored.
Functions menu
Each time Function button is pressed, the
following functions are activated in a clock-
wise direction:
• Fast Freeze function
• Shopping function
• Minidac function
• Performance Optimization function
• no symbol: normal operation.
Important! You can set one function ON at
a time.
To set the functions OFF, press the Func-
tion button several times until no icon ap-
pears.
Temperature regulation
The temperature within the appliance is
controlled by the Temperature regulator sit-
uated at the top of the appliance.
The temperature of the fridge compartment
may be regulated by rotating the Fridge
temperature regulator, and may vary be-
tween more or less +2°C and +8°C.
The temperature of the freezer compart-
ment may be regulated by rotating the
Freezer temperature regulator, and may
vary between more or less -15°C and
-24°C.
11) In normal conditions.
By turning the Temperature regulator, the
display flashes and shows the desired tem-
perature.
For a correct storage of the food the follow-
ing temperatures should be set:
+5°C in the fridge
-18°C in the freezer.
After having set the desired temperature, if
the Temperature regulator is not rotated
within 5 seconds, the temperature of the
freezer compartment will be indicated.
To operate the appliance, proceed as fol-
lows:
• turn the Temperature regulator clockwise
to obtain the maximum coldness
• turn the Temperature regulator counter-
clockwise to obtain the minimum cold-
ness.
The intermediate position is usually the
most suitable.
However, the exact setting should be chos-
en keeping in mind that the temperature in-
side the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Performance optimization Function
The Performance optimization function is
activated by pressing Function button (sev-
eral times if necessary) until the corre-
sponding icon appears
In this condition the chosen temperatures
are automatically set, in the best conditions
for storing food and therefore any possible
operation through the keys does not cause
any change as long as this function is acti-
vated.
It is possible to de-activate the function at
any time by pressing Function button (see
"Activation of functions" ) .
Shopping Function
If you need to insert a large amount of
warm food, for example after doing the gro-
cery shopping, we suggest activating the
Shopping function to chill the products
more rapidly and to avoid warming the oth-
er food which is already in the refrigerator.
The Shopping function is activated by
pressing Function button (several times if
necessary) until the corresponding icon ap-
pears .
.