JVC InteriArt AV-28Z25EU Bedienungsanleitung Seite 39

2 Press the green button and start
the INSERT function
EDIT
PR ID CH / CC
AV
01 BBC1 CH
02 CH
03 CH
04 CH
05 CH
06 CH
07 CH
08 CC
09 CC
BACK
TV OK 0 9
CH / CC
D0034-EN
3 Press the 6 6 buttons to choose
6 6
"CC" or "CH" according to the CH/
CC number of the TV channel
When the COUNTRY setting is
FRANCE:
Choose "CH1", "CH2", "CC1" or "CC2".
To cancel the INSERT function:
Press the h (Information) button.
4 Press the Number buttons to enter
the remaining CH/CC number
The TV shifts to registration mode.
When the registration is completed, the
picture of the TV channel appears on the
screen.
• The CH/CC number is a number
indicating the broadcast frequency to
the TV. If the TV cannot detect the TV
channel corresponding to the broadcast
frequency indicated by the CH/CC
number, a picture in the no-signal state
appears.
DELETE
1 Press the 6 6 buttons to choose a
6 6
TV channel
Every time you press the 6 buttons, the
Programme number (PR) is changed over,
and the picture of the TV channel
registered in the Programme number (PR)
appears on the screen.
2 Press the yellow button to delete
the TV channel
The TV channel is deleted from the
Programme numbers (PR) list.
21
22
23
24
25
26
02
03
MANUAL
Preparation:
• As long as you register the TV channel
(SECAM-L system) from a French
station, be sure to set the COUNTRY
setting to FRANCE. If the COUNTRY
setting is not FRANCE, follow the
description "Changing the COUNTRY
setting" on page 40 to change the
COUNTRY setting to FRANCE, then
start the MANUAL function.
1 Press the 6 6 buttons to choose a
6 6
Programme number (PR) to which
you want to register a new TV
channel
2 Press the blue button to activate
the MANUAL function
At the right side following the CH/CC
number, the SYSTEM (broadcasting
system) of the TV channel appears.
MANUAL
PR ID
AV
01 BBC1
02
03
04
05
06
07
08
09
BACK
TV OK
SYSTEM
D0035-EN
To cancel the MANUAL function:
Press the h (Information) button.
3 Press the 3 3 3 3 button to choose the
SYSTEM (broadcasting system) for
a TV channel you want to register
TV channel (SECAM-L system)
from a French station:
Set the SYSTEM to "L". If it is set to one
other than "L", you cannot receive the TV
channel of the SECAM-L system.
Using the TV's menu
CH / CC
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CC 01 ( B / G )
CC 02
CC 03
SEARCH +
SEARCH-
FINE +
FINE-
37