Zoom Function - JVC InteriArt AV-28Z25EU Bedienungsanleitung

• You can choose a video input signal
from the S-VIDEO signal (Y/C signal)
and regular video signal (composite
signal). For details, see "S-IN (S-
VIDEO input)" on page 28.
• If you do not have a clear picture or no
colour appears, change the colour
system manually. See "COLOUR
SYSTEM" on page 19.
• If you choose an EXT terminal with no
input signal, the EXT terminal number
becomes fixed on the screen.
• This TV set has a function which can
automatically change over the input
according to a special signal output
from an external device. (The EXT-4
terminal does not support it.)
To return to a TV channel:
Press the b button, the 6 buttons or the
Number buttons.
To use the Programme number PR 0
(AV):
When the TV and VCR are connected only
by the Aerial cable, choosing the Programme
number PR 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the Programme number PR 0
(AV) manually. For details, see "EDIT/
MANUAL" on page 34.
Pressing the o button changes the
choice as follows:
TV mode
Programme
PR 0
numbers
PR 1 – PR 99
• The VCR RF channel is sent as the RF
signal from the VCR.
• Also refer to your VCR instruction
manual.
EXT modes
EXT-1 EXT-2
EXT-4 EXT-3
Remote control buttons and functions

ZOOM function

You can change the screen size according to
the picture aspect ratio. Choose the optimum
one from the following ZOOM modes.
AUTO:
For any picture format except Normal Picture
(4:3 Aspect Ratio), the picture will be
automatically displayed in the optimum
screen size.
For Normal Picture (4:3 Aspect Ratio), the
picture displayed in accordance with the
ZOOM mode set on the 4:3 AUTO ASPECT
menu. For details, see "4:3 AUTO ASPECT"
on page 20.
• AUTO may not function properly with
poor signal quality. In this case, choose an
optimum ZOOM mode manually.
• This TV supports WSS (wide-screen
signals). When broadcasts with WSS are
received with the ZOOM mode set at
AUTO, the most suitable ZOOM mode is
automatically chosen according to the
WSS received.
REGULAR:
Use to view a normal picture (4:3 aspect
ratio) as its original size is.
PANORAMIC:
This mode stretches the left and right sides of
a normal picture (4:3 Aspect Ratio) to fill the
screen, without making the picture appear
unnatural.
• The top and bottom of the picture are
slightly cut off.
11