JVC InteriArt AV42PD20ES Bedienungsanleitung Seite 27

DELETE
1 Press the 6 6 buttons to choose a TV channel
6 6
Every time you press the 6 buttons, the programme
number (PR) is changed over, and the picture of the TV
channel registered in the programme number (PR)
appears on the screen.
2 Press the yellow button to delete the TV
channel
The TV channel is deleted from the programme numbers
(PR) list.
MANUAL
Preparation:
• If you register a TV channel (SECAM-L system) from a
French station, be sure to set the COUNTRY setting to
FRANCE. If the COUNTRY setting is not FRANCE,
follow the description "Changing the COUNTRY
setting" on page 29 to change the COUNTRY setting to
FRANCE, then start the MANUAL function.
1 Press the 6 6 buttons to choose a programme 6 6
number (PR) to which you want to register a
new TV channel
2 Press the blue button to activate the MANUAL
function
At the right side following the CH/CC number, the
SYSTEM (broadcasting system) of the TV channel
appears.
MANUAL
PR ID CH / CC
AV
01 BBC1 CH 21
02 CH 22
03 CH 23
04 CH 24
05 CH 25
06 CH 26
07 CC 01 ( B / G )
08 CC 02
09 CC 03
SEARCH +
BACK
SEARCH-
TV OK
FINE +
SYSTEM
FINE-
D0035-EN
To cancel the MANUAL function:
Press the h (Information) button.
3 Press the 3 3 3 3 button to choose the SYSTEM
(broadcasting system) for a TV channel you
want to register
TV channel (SECAM-L system) from a French
station:
Set the SYSTEM to "L". If it is set to one other than "L",
you cannot receive the TV channel of the SECAM-L
system.
Other TV channels:
If you do not know the correct broadcasting system, set
the SYSTEM to "B/G". If "B/G" is not correct, you will
not hear the sound normally when the TV detects a TV
channel. In this case, set the SYSTEM again correctly so
that no problem arises.
• SYSTEM is not displayed if the COUNTRY setting
is set to UNITED KINGDOM or IRELAND.
4 Press the green or red button to search for a TV
channel
Scanning stops when the TV finds a TV channel. Then
the TV channel is displayed.
5 Press the green or red button repeatedly until
the TV channel you want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-tune the TV
channel.
If you cannot hear the normal sound even when
the picture of the TV channel appears normally:
The SYSTEM setting is wrong. Press the 3 button and
choose a SYSTEM that has normal sound.
• SYSTEM is not displayed if the COUNTRY setting
is set to UNITED KINGDOM or IRELAND.
6 Press the a a button and register the TV a a
channel to a programme number (PR)
The normal EDIT menu is resumed.
Using the TV's menu
25