Ext Setting - JVC Natural Vision AV28CT1EP Bedienungsanleitung

EXT SETTING

EXT SETTING
EXT SETTING EXT SETTING
To display EXT SETTING menu:
Press the a a a button to display MENU a
1
(main menu).
Press the 6 button to choose EXT SET-
2
TING. Then press the a
y (S-VIDEO input) (S-VIDEO input)
(S-VIDEO input) (S-VIDEO input)
I I I I y
y y
When connecting a device (such as S-VHS VCR) which ena-
bles an S-VIDEO signal (Y/C signal) to be output, you can en-
joy high-quality picture of the S-VIDEO signal (Y/C signal).
Preparation:
• At first, read the Device Instruction Manual and "ADDITION-
AL PREPARATION" on page 30 to connect the device to the
TV properly. Second, follow the Device Instruction Manual
to set the device so that a S-VIDEO signal (Y/C signal) can
be output to the TV.
• Do not set y
y (S-VIDEO input) to the EXT terminal con-
y y
nected to a device which cannot output a S-VIDEO (Y/C sig-
nal). If it is set wrongly, a picture cannot appear.
Press the 6 buttons or 5 buttons to
1
choose an EXT terminal.
EXT-1
P
EXT-3
EXT-4
P
TV
Press the yellow button and set the y
2
(S-VIDEO input).
A y y y (S-VIDEO input) mark is displayed. You can view y
an S-VIDEO signal (Y/C signal) instead of the regular
video signal (composite signal).
To cancel the y y (S-VIDEO input) setting: y y
Press the yellow button and turn off y
put) mark.
The regular video signal (composite signal) pictures are
resumed.
a button.
a a
EXT-2
y y y
y (S-VIDEO in-
y y
Press the a a button to complete the set-
a a
3
ting.
The menu disappears.
Note:
• The EXT-1 terminal does not support S-VIDEO signal
(Y/C signal) and you cannot set y
in the EXT-1 terminal.
• Setting y
y (S-VIDEO input) changes the head
y y
character from "E" to "S". For example, "E2" is
changed to "S2".
• Even an device which enables the S-VIDEO signal (Y/
C signal) to be output may output a regular video sig-
nal (composite signal) depending on the device set-
ting. If a picture cannot appear because y
VIDEO input) setting has been made, read the device
Instruction Manual carefully again to check for the de-
vice settings.
LIST LIST LIST LIST
I I I I
You can have a name corresponding to the devices connect-
ed for each EXT terminal. Giving a name to an EXT terminal
makes the EXT terminal number appear on the screen, to-
gether with the name.
1 6
Press the buttons or
choose an EXT terminal.
EXT-1
P
EXT-3
EXT-4
P
TV
2
Press the blue button to display the name
list (LIST).
y (S-VIDEO input) y y
y (S- y y
5
buttons to
EXT-2
19